We cleaned, treated, dried out and repainted a chemical store whose blockwork walls had become coated in mould, so the room could be used again.
| Site | Chemical store |
|---|---|
| Service | Commercial mould removal |
| Area | The store’s blockwork walls, floor to ceiling |
| Work | Clean, treat, dry out and repaint, with a written report |
The challenge
Black mould had spread across the store’s blockwork walls, from the floor to the ceiling and into the corners. As well as looking bad, mould makes for an unsafe working environment, and the room couldn’t be used as it was.
What we did
- Protected the team with full PPE: respirators, disposable suits and gloves.
- Cleaned the mould off every wall.
- Treated the cleaned surfaces.
- Dried out the affected areas thoroughly, using drying equipment we installed.
- Repainted the walls.
The outcome
The walls were left clean and painted white, and the store was ready to go back into use.
We also issued a written report explaining the likely causes of the mould and what could be done to stop it coming back.
Before and after
Each pair shows the same wall before we started (left) and after we finished (right).
Mould in a store, plant room or warehouse?
We clean, treat, dry out and repaint mould-damaged walls and ceilings in commercial and industrial buildings, and report on what caused the mould. Every job starts with a free site survey. Call 0800 634 2771 or ask for a free quote.
Related: Hazardous and chemical cleaning · Cold store cleaning · Industrial cleaning



